6. MAINTENANCE
Caution : Remove test leads before
opening the battery cover
or housing case !
6-1 Cleaning
Caution : Cleaning - Only use
the dry cloth to clean
the plastic case !
6-2 Replacement of batteries
1) When Display show the " LOWBAT " indicator ( ref. 5-15
page 67 ), it should change the batteries.
2) open the " Battery Cover " ( 3-19, Fig. 1 ) away from the
instrument and remove the battery.
3) Replace with batteries ( DC 1.5V, AA/UM-3 battery
X 8 PCs ) and reinstate the cover.
* When install the batteries, should make
attention the battery polarity.
4) Make sure the battery cover is secured after changing
the batteries.
69
To Next Page
Loading...
