15
SM
LUTRON
FADE OVERRIDE
ZONE
MASTER
ZONE 6ZONE 5ZONE 4ZONE 3ZONE 2ZONE 1
STEP 14: Set Up Scenes on the GRX-4000
A. Lift the cover flap on a GRX-4000 Series Control
Unit (flap hinges up).
B. Press the Scene 1 button.
C. Press and buttons of each zone to create a
scene. As soon as a zone is changed, the GRX-
4000 Series Control Unit will remember it.
D. Adjust the fade time using and FADE
buttons.
Note:
The fade time can be adjusted from 0 to 59
seconds or 1 to 60 minutes.
E. Press Scene 2 and repeat C-D. Do this for all
scenes.
Note:
Off scene may have Fade time adjusted.
F. Repeat Steps A-E for all of the GRX-4000 Series
Control Units on the job.
A
E
DC
GRX-4000 Series Control Unit
Set Up Scenes on the
GRX-4000
B
Step by Step instructions for GRAFIK Eye Switching Panel
To Next Page
Loading...
