Luxman L-590AX User Manual

4
Names and Functions
1. Operation switch (OPERATION)
Toggles the power on and off.
When wiring or connection is performed, be sure to turn off
this switch.
2. Operation indicator (OPERATION)
Blinks in the time of muting mode when the operation
switch is turned on and lights up when the operation state
is activated afterward. This indicator blinks when the unit is
in the muting mode or when the volume is adjusted with the
remote control.
3. Input selector (INPUT SELECTOR)
Selects an input device from the devices such as a CD play-
er, an SACD player and a tuner connected to each input
terminal.
The input selector has 7 positions consisting of LINE-4,
LINE-3, LINE-2, LINE-1, BAL LINE-1, BAL LINE-2, and
PHONO from left to right that correspond to each input ter-
minal on the rear panel. The knob is rotated to light the input
indicator of the input device to be selected.
4. Input indicator
Lights up at the input device to be selected with the input
selector or remote control.
891011121314151617
5 6
71 2 43
Front panel

Luxman L-590AX Specifications

General

Type	Integrated Amplifier
Output Power	30W + 30W (8Ω), 60W + 60W (4Ω)
Input Impedance	47kΩ (LINE)
Frequency Response	20Hz-20kHz (+0, -0.5dB)
Signal-to-Noise Ratio	105dB (LINE)
Dimensions	440 x 193 x 463 mm