EasyManuals Logo

Lynx L27-2 User Manual

Lynx L27-2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
35
Keep thr
eading compound
off of the rst two pipe
Keep thr
off of the rst two pipe
Keep thr
eading compound
off of the rst two pipe
eading compound
threads to avoid having
off of the rst two pipe
threads to avoid having
off of the rst two pipe
any small pieces of
threads to avoid having
any small pieces of
threads to avoid having
compound break loose and
any small pieces of
compound break loose and
any small pieces of
clog a burner valve or
compound break loose and
clog a burner valve or
compound break loose and
orice. Do not use
clog a burner valve or
orice. Do not use
clog a burner valve or
threading compound on
any are ttings
threading compound on
any are ttings
threading compound on
.
F
or
built-in installations, it is rec-
ommended that any exible
pipe used be kept as short
as possible.
pipe used be kept as short
as possible.
pipe used be kept as short
(
S
ee
INDE
X: “
G
as
C
onnections” for typical permanent
hook up.)
F
or
freestanding
units using
freestanding
units using
freestanding
natural gas,
L
ynx str
Lynx strL
ongly
recommends using a quick
disconnect kit.
recommends using a quick
disconnect kit.
recommends using a quick
, is available from your dealer
LP
GAS
G
rills set up for
LP
gas come
equipped with an LP hose/
rills set up for
equipped with an LP hose/
rills set up for
r
egulator assembly for con-
equipped with an LP hose/
egulator assembly for con-
equipped with an LP hose/
nection to a standard 20 lb.
LP
cylinder. (Type 1). All ttings
necessary to attach the
cylinder. (Type 1). All ttings
necessary to attach the
cylinder. (Type 1). All ttings
assembly to the grill are
included.
any are ttings
.
built-in installations, it is rec-
ommended that any exible
Keep
last two
Keep
last two
Keep
threads
clean
disconnect kit.
T
his
Q
uick
D
isconnect kit, part
#
LQD
, is available from your dealer
.
included.
LP
cylinder with type 1 valve
connection
connection
P
ermanently plumbed
LP
con-
nections, such as those in line
ermanently plumbed
nections, such as those in line
ermanently plumbed
with a bulk cylinder
, require
with a bulk cylinder, require with a bulk cylinder
a 4/11 regulator. (
L
ynx
Lynx L
P
/
, require
/
, require
N
30781)
W
hen using the 4/11 regulator
you must ensur
e that it is set for
the proper fuel type.
T
his is done
by removing the regulator cap and
by removing the regulator cap and
gasket and looking at the bottom
gasket and looking at the bottom
of the plunger to see what fuel
of the plunger to see what fuel
type is visible.
type is visible.
T
his is the regulator
fuel setting.
fuel setting.
NAT
is for natural gas
NAT is for natural gas NAT
and
and
LP
is for propane gas.
T
he
LP
setting can be further identied
setting can be further identied
by the large diameter disk on the
by the large diameter disk on the
bottom of the plunger.
bottom of the plunger.
T
o change
To changeT
from one gas to the other simply
from one gas to the other simply
push the plunger to the side to
snap it out of the cap, turn the
plunger so it reads the desired gas
type on the bottom, and push the
plunger until it snaps back into
place in the cap then replace the
cap into the regulator.
gas line to the grill.
warning
Do not change the regulator/hose
assembly or use any other assembly
than the one supplied with your
Lynx grill.
than the one supplied with your
Lynx grill.
than the one supplied with your
Do not attempt to use a 5LP-A
equipped regulator/hose assembly
Do not attempt to use a 5LP-A
equipped regulator/hose assembly
Do not attempt to use a 5LP-A
with a standard 510 POL cylinder/
equipped regulator/hose assembly
with a standard 510 POL cylinder/
equipped regulator/hose assembly
valve assembly.
Do not store a spare LP-gas cylinder
under or near this appliance
Do not store a spare LP-gas cylinder
under or near this appliance
Do not store a spare LP-gas cylinder
Never ll the cylinder beyond 80
percent full
Never ll the cylinder beyond 80
percent full
Never ll the cylinder beyond 80
If the information above is not
followed exactly, a re causing
death or serious injury may occur.
LP
C
ylinder
R
equirements
T
he
LP
cylinder must be con-
structed and marked in accor-
dance with the specications
for
dance with the specications
for
dance with the specications
LP
gas cylinders of the
dance with the specications
gas cylinders of the
dance with the specications
U
.
S
dance with the specications
S
dance with the specications
.
D
epartment of
gas cylinders of the
epartment of
gas cylinders of the
T
ransportation
Transportation T
(
DOT
epartment of
DOT
epartment of
) and designed for use
epartment of
) and designed for use
epartment of
ransportation
) and designed for use
ransportation
with a
T
ype 1 system only
Type 1 system onlyT
.
C
ylinders of free standing
grills must be secured using
the provided cylinder
retention system to avoid
the provided cylinder
retention system to avoid
the provided cylinder
accidental movement.
cylinder for a rell, exchange
only for a
cylinder for a rell, exchange
only for a
cylinder for a rell, exchange
T
ype 1 20lb cylinder
Type 1 20lb cylinder T
with an over
ype 1 20lb cylinder
with an over
ype 1 20lb cylinder
-ll protection
ype 1 20lb cylinder
-ll protection
ype 1 20lb cylinder
with an over-ll protection with an over
ype 1 20lb cylinder
with an over
ype 1 20lb cylinder
-ll protection
ype 1 20lb cylinder
with an over
ype 1 20lb cylinder
device.
N
ever use a cylinder with a
damaged valve.
A
dented or rusty
LP
cylinder
may be hazardous and should
be avoided.
I
f in doubt, have
may be hazardous and should
f in doubt, have
may be hazardous and should
it checked by your
LP
supplier.
A
lways check for leaks after
every
LP
cylinder change.
(
S
ee
INDE
X: “
L
eak
T
est” for further
Test” for further T
details.)
A
lways shut off the
LP
-gas
supply at the cylinder when
the grill is not in use.
supply at the cylinder when
the grill is not in use.
supply at the cylinder when
C
ylinders must be stored
outdoors in a well-venti-
lated area out of the reach of
children.
I
f your grill is stored
indoors, the
LP
cylinder must
be stored outside.
W
hen exchanging your
cylinder for a rell, exchange
hen exchanging your
cylinder for a rell, exchange
hen exchanging your
cap into the regulator.
N
ever connect an unregulated
gas line to the grill.

Other manuals for Lynx L27-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lynx L27-2 and is the answer not in the manual?

Lynx L27-2 Specifications

General IconGeneral
BrandLynx
ModelL27-2
CategoryGrill
LanguageEnglish

Related product manuals