Lynx L27-2 User Manual

21
GR
I
LL
W
ON
T
L
I
G
H
T
First, conrm that the grill is
getting electricity by turning
on the lights, then:
CHEC
K
THE IGNITE
K THE IGNITEK
R
S
Y
our
Your Y
L
ynx grill uses an electric
Lynx grill uses an electric L
ignition system that does not
spark.
I
nstead, the igniters
should glow constantly when
spark.
should glow constantly when
spark.
a control knob is pushed in.

E
nsure that all burner
controls are set to
OFF
.
OFF. OFF

Remove the cooking
grates and briquette trays.

W
atch an igniter as you
push in and hold the
corr
esponding control
push in and hold the
esponding control
push in and hold the
knob.
esponding control
knob.
esponding control
Y
ou will need either
esponding control
ou will need either
esponding control
You will need either Y
a
small mirror or shiny
metal object to see the
igniter under its cover.
igniter under its cover.
(Be sure you push in the
correct control knob and
(Be sure you push in the
correct control knob and
(Be sure you push in the
keep the knob in the
“
OFF
keep the knob in the
OFF
keep the knob in the
” position)
keep the knob in the
” position)
keep the knob in the

C
heck the remaining
igniters.
I
f igniters don’t
heck the remaining
f igniters don’t
heck the remaining
glow, proceed with trou-
bleshooting or match-
glow, proceed with trou-
bleshooting or match-
glow, proceed with trou-
light the burner.
CHEC
K
THE
B
U
R
NE
R
S
I
f the igniters are working
check to see if gas is
f the igniters are working
check to see if gas is
f the igniters are working
reaching the burners by at-
tempting to match light a
burner.
tempting to match light a
burner.
tempting to match light a
B
E
CA
R
EFUL
!
IF
THE
B
U
R
NE
R
FAILS
TO
IGNITE
,
W
AIT
WAITW
5
MINUTES
B
EFO
R
E
A
TTEMPTING
ATTEMPTINGA
TO
IGNITE
OTHE
R B
U
R
NE
R
S
!
(
S
ee
INDE
X: “
M
atch
L
ighting” for
further details.)
I
f match lighting doesn’t
f match lighting doesn’t
work, r
work, r
e-check fuel connec-
f match lighting doesn’t
e-check fuel connec-
f match lighting doesn’t
tions for leaks and ensure
tions for leaks and ensure
the supply is of the correct
the supply is of the correct
type and is of adequate
type and is of adequate
the supply is of the correct
type and is of adequate
the supply is of the correct
the supply is of the correct
type and is of adequate
the supply is of the correct
SMELL
OF
GAS
WHI
LE
COO
KI
NG
IF
YOU
SMELL
GAS
WHILE
THE
G
R
ILL
IS
OPE
R
ATING
,
IMMEDIA
TELY
IMMEDIATELYIMMEDIA
TU
R
N
OFF
ALL
B
U
R
NE
R
S
AND
SHUT
OFF
THE
MAIN
FUEL
SUPPLY
.
SUPPLY. SUPPLY
P
E
R
FO
R
M A LEA
K
TEST
K TEST K
(
S
ee
INDE
X: “
L
eak
T
est” for
Test” for T
further details.)
C
HEC
K
FO
K FOK
R
B
LOC
K
AGES
KAGES K
(
S
ee
INDE
X: “
C
lean the Brass
Bur
ner” for further details.)
ON
’
T
L
I
G
H
T
(Be sure you push in the
pOTENTIAL
pROBLEMS
T
ROUBLESHOOTING
Y
OUR
L
OUR LOUR
YN
LYN L
x G
YNx GYN
RILL
pressure.
(
S
ee
INDE
X: “
X: “
L
eak
T
est”
Test” T
for further details.)
for further details.)
I
f the burner will light with a
match, then the igniter may
not be functioning correctly.
match, then the igniter may
not be functioning correctly.
match, then the igniter may
C
all for service.
not be functioning correctly.
all for service.
not be functioning correctly.
I
f the burner will not match
light, and you know you are
getting gas, wait for any
light, and you know you are
getting gas, wait for any
light, and you know you are
gas to dissipate and remove
the burner and check it for
gas to dissipate and remove
the burner and check it for
gas to dissipate and remove
blockages.
(
S
ee
INDE
X: “
C
lean
the Brass Bur
ner” for further details.)
BEFORE
YOU
CALL
FOR
SERV
I
CE
P
lease check a few things before calling for service
:
I
s there fuel supplied to the grill?
I
s the main shut-off valve open?
A
re you using the correct type of fuel? (
LP
or
N
atural
G
as)
(See INDEX: “Gas Requirements” for further
details.)
Is your pr
opane cylinder empty? Have you recently relled the propane cylinder? If so, is the
connection tight?
Is your pr
connection tight?
Is your pr
opane cylinder empty? Have you recently relled the propane cylinder? If so, is the
connection tight?
opane cylinder empty? Have you recently relled the propane cylinder? If so, is the
H
ave you opened the valve on the propane cylinder?
I
s the grill plugged in to a live electric circuit?
I
f you’ve checked the above items, review the trouble-shooting list below before calling for
L
ynx for
Lynx for L
service.

Lynx L27-2 Specifications

General

Brand	Lynx
Model	L27-2
Category	Grill
Language	English