Lynx S-30 User Manual

3.5 USB Port
The USB port can only be used in conjunction with windows drivers. The windows drivers are available at
http://techsupport.signwarehouse.com/HTML/Cutters/index.html
***DISCLAIMER***
This is a vinyl cutter! It is not intended to be used with windows drivers or as a printer. SignWarehouse.com
does not recommend that you use these drivers.
Mac USB PIA Cable
PC Serial Cable
PC Parallel Cable
Back of PC
Serial Port
(COM 1)
Parallel Port
(LPT 1)
Back of laptop computer
Figure 3-3
3. Connecting the Cutter 3-3
Monitor Connection

Lynx S-30 Specifications

General

Brand	Lynx
Model	S-30
Category	Cutter
Language	English