EasyManua.ls Logo

Lynx Yeti 550 - DESS Pilot Lamp; Engine Cut-Out Switch

Lynx Yeti 550
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To check for bad connection, remove
tether cord cap. Make sure the tether
cordcapisfreeofdirtorsnow. Rein-
stall cap and restart engine. If a blink
still occurs, contact an authorized deal-
er.
1. Free of dirt and snow
A D ESS p ilot lam p blin king 3 t imes per
second means that y ou have installed
a cap with a code th at MPEM of this
snowmobile was not programmed to
recognize (wrong key). Vehicle can
not be driven.
10) DESS p ilot lamp
This lamp will lig ht up to confirm DESS
status. Refer to previous paragraphs
for description.
11) Engine cut-out switch
This push-pull type or toggle type
switch is located on the right side of
the han dlebar. To stop the engine in
an emerge n c y, select O FF position
and simultaneously apply the brake.
To restart, button must be at the ON
position.
1. ON
2. OFF
All operators of the snowmobile
should familia rize themselves with
the function of this device by us-
ing it several times on first outing
and whenever stopping the engine
there-after. This engine cut-out pro-
cedure will become a r efle x and will
prepare operators for emergency situ-
ations requiring its use.
30
______________________

Table of Contents