MODELS
MAXIMUM
OUTPUT
CURRENT
LOCATION
20 amperes Rear rack
Yet i P r o
V800
5 amperes
Dashboard
All others
5 amperes
Dashboard
A29I04A
TYPICAL — EL ECTRIC POWER OUTLET
Yeti pro v-800 Model O nly
With the engine running, use the
toggle switch mounted on the mu lti-
switch housing to supply current to
the rear rack power outlet.
mmo2008-001-017_a
MULTI-SW ITCH HOUSING
1. Rear power ou tlet switch
2. Upper/Lower O N position
3. Middle OFF position
mmo2008-001-016_a
YETI PRO V-800 MODEL ONLY — REA R RA CK
22. Electric power outlet
24) Fuse
To remove fuse from holder, pull fuse
out. Check if filament is melted.
1. Fuse
2. Check if m elte d
Fuse for starting system and
electric power outlet
Starting system and electric pow er
outlet is protected (if equipped) with
20 ampere fuse. If the starter and
electric power outlet is out of func-
tion, c heck the fuse condition and
replace if needed.
NOTE: Donotuseahigherratedfuse
as this can cause severe damage to
electric components and/or fire.
Yet i models To open fuse box push on
cover tab and tilt cover.
34
______________________
To Next Page
