40
Settings
You can select specific settings for each assignable control or control bank while in Control
Mode. These settings will be saved with the Preset.
Important: To view and edit your assignable controls' settings, their mapping must be set to
MIDI instead of Arsenal. To change this, see the following Mapping section.
These are the available settings for each control. Click a name to skip to that section of this
chapter:
Mapping
Message
Value
(Assignable Knobs and Assignable Faders only)
Colors
(Assignable Buttons only)
Type
(Assignable Buttons only)
MIDI Channel and Output
To Next Page
Loading...
