90
Sequencer Velocity
The Sequencer Velocity determines the default velocity level of steps entered by using the
Step Switches.
To set the Fixed Mode velocity in your Preferences:
1. Enter Preferences by pressing the third Function Button (Prefs) while in Performance
Mode.
2. Turn the fourth Assignable Knob (Seq Vel) to set the desired velocity (00–127). This is
the Sequencer's overall velocity.
3. Make other changes to your Preferences, or exit Preferences by pressing the fourth
Function Button (Exit) or another mode button.
Tip: You can also set the Sequencer Velocity in Sequence Mode. See Working with
Sequences: Steps: Velocities to learn more.
PREFERENCES
MIDI-CH:
01
MIDI-OUT
USB
FIX VEL:
127
SEQ VEL:
127
TAP LED:
On
CLOCK:
Internal MORE
Firmware: v01.00Boot: v00.24
EXIT
To Next Page
Loading...
