M-Audio Trigger Finger Pro - Pad Roll Mode

82
Pad Roll Mode
Pad Roll Mode causes pads, when pressed and held, to automatically retrigger at a regular
rate in quick succession, similar to a drum roll. This is useful for creating fills during
performance.
Press the Roll button to activate or deactivate Pad Roll Mode. When you press and hold a pad
while in this mode, the pad's sound will repeat at the rate determined by the current Time
Division setting.
Important: The Time Division setting affects both Sequence playback and Pad Roll Mode. In
other words, the rate of a pad roll will always correspond to the Sequence's Time Division. To
learn how to set the Time Division, see Timing: Time Division.
To roll one or more pads:
1. Enter Pad Roll Mode by pressing the Roll button.
2. Press and hold any pad (or pads) whose sounds you want to roll. A pad will flash when it
is held while in Pad Roll Mode. Release a pad to stop the roll.
3. Exit Pad Roll Mode by pressing the Roll button.