77
Pad Mute Mode
Pad Mute Mode lets you mute all sounds in a Sequence that are played by a pad (or multiple
pads). You can do this during Sequence playback or while the Sequence is stopped. This can
be useful for simply removing certain sounds from a Sequence. It is also an interesting
production/performance technique in and of itself!
Note: Muting a pad does not disable it; you can still hit the pad to hear its sound. Muting it just
silences it in the Sequence.
To mute one or more pads:
1. Enter Pad Mute Mode by pressing the Mute button.
2. Press any pad (or pads) whose sounds you want to mute or un-mute.
You can un-mute all muted pads by pressing the third Function Button (Un-Mute All).
3. Exit Pad Mute Mode by pressing the Mute button or the fourth Function Button (Exit).
Tip: You can also mute entire pad banks. See the following section to learn more.
SEQUENCER PAD MUTE MODE
Use pads to selectively mute
pads in the current sequence
PAD BANK: A
UN-MUTE
ALL EXIT
To Next Page
Loading...
