71
Gate
The Gate setting determines the length of the notes (steps) of the Sequence. With a small Gate
setting, the note events of the Sequence will be very short and staccato-sounding. With a
large Gate setting, the note events will be longer and more legato-sounding.
To set the Gate of a Sequence:
1. Enter Sequence Mode by pressing the Sequence Mode (Seq) button.
2. Turn the third Knob (Gate) to adjust the value:
• 99% is the maximum setting (long notes)
• 0% is the minimum setting (extremely short notes; certain devices may not respond
to notes this short)
• 50% is the default setting
3. Exit Sequence Mode by pressing the Sequence Mode (Seq) button or fourth Function
Button (Exit).
SEQUENCER 01: Sequence
TEMPO:
120
SWING:
50%
GATE
50%
FIX VEL:
127
EDIT
VELOCITY
PAGE:
1 of 2 EXIT
BANK:A BAR:01 PAD:A01
CHANGE->
SEQUENCE
BARS:
02
To Next Page
Loading...
