MADE IN ITALY
19
electric modular oven
When equipment is no more of use, all its parts must be removed and disposed of according to
the current laws applied in the Country of installation. For this reason, the following procedure
Have qualified staff disconnecting the electric, hydraulic and fuel feedings.
Start by draining all fluids. The oven should be disassembled by following backwards the
instructions included in the chapter "Assembling instructions".
Equipment must be decommissioned by a qualified waste disposal company.
The appointed company should take care of decommissioning the oven, separating and dividing
all components by type of material, and send them to their final destination. The insulating
material contained in the machine cavities must be collected in strong plastic bags and stored in
special refuse disposal site.
The insulating material contained in the machine cavities can irritate skin and respiratory
system
It is recommended that you wear protective garments including masks and gloves.
To Next Page
Loading...