MADE IN ITALY
61
electric modular oven
The instrument can memorise up to 9 baking programs and for each of them, it can
memorise:
- the (set) temperature of the bedplate
- the (set) temperature of the ceiling
You cannot select or modify any program during the baking cycle.
Setting a program with the oven RUNNING
Press and release the PROGRAMS key; on the TIME display appears the PrG1 program
label and the LED on the PROGRAMS key turns on.
Select the desired program using the UP and DOWN arrows of the clock display.
Press the PROGRAMS key again. The SET and TIME LEDs turn on, the Ceiling and Bedplate
Set Points appear on the relevant displays and the baking time appears on the CLOCK
display. The LED of the PROGRAMS key blinks.
Set the values and confirm them within 10s by pressing the PROGRAMS key again
The PROGRAM IS LOADED and the display shows the temperature again. The LED on the
PROG key turns on
To change another program, start from point 1.
Setting a program with the oven in STAND-BY
Press and release the PROGRAMS key; the TIME display shows the label of the program,
PrG1, and the LED on the PROGRAMS key turns on.
Select the desired program using the UP and DOWN arrows of the clock display.
Press the PROGRAMS key again. The SET and TIME LEDs turn on, the Ceiling and Bedplate
Set Points appear on the relevant displays and the baking time appears on the CLOCK
display. The LED of the PROGRAMS key blinks.
Set the values and confirm them within 10s by pressing the PROGRAMS key again
The program is now memorised and the next program is displayed. To modify it, repeat the
operations from point 3.
Press and release the PROGRAMS key; the TIME display shows the label of the program,
PrG1, and the LED on the PROGRAMS key turns on.
Select the desired program using the UP and DOWN keys.
Confirm the program by pressing PROGRAMS again. The SET and TIME LEDs turn on, the
Ceiling and Bedplate Set Points appear on the relevant displays and the baking time appears
Disabling the active program
With the PROGRAMS LED on, press the PROGRAMS key; the LED turns off.
To stop the currently active program, press the START key and then press PROGRAMS; the
LED turns off
Starting a baking cycle with an active program
After selecting the program (PROGRAMS LED on), you can start the baking cycle via the
standard modes: by pressing START for or with the automatic modes
To Next Page
Loading...