EasyManua.ls Logo

mac.pan MD - Warnings and Safety

mac.pan MD
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MADE IN ITALY
5
electric modular oven
MD CAP. 1 PAG. 3
1.1
Warnings
General warnings
The instructions manual is an integral part of the furnace and must be kept close at hand, for
consulting and/or reference in a protected, dry area.The instructions manual must be kept until the
furnace is dismantled.A copy of the instructions manual can be obtained from the manufacturer
maintaining sales conditions unaltered for regular spare parts.
The manual is usually sent with each furnace, inside the furnace.
The manual is an integral part of a professional appliance but cannot be used to replace by no
means the appropriate training the user needs. The manual contains all the instructions from
installation to final disposal of the furnace. It also contains all details for a safe and correct use,
maintenance and clearing. Line and cable sizing have to be executed according to the technical
data as well as any optional of the machine.
SYMBOLS
NOTES contain important info on the furnace management.
WARNING contain procedures to be applied. Failure to comply with them can cause damages to
the appliances.
CAUTION include special procedures. Failure to comply with them can cause damages to
the operator.
ENCLOSURES report to the side the letter of reference.
Safety warnings
Before running the furnace, carefully read this manual, and fully comply with all the safety
regulations and recommen_ dations included.
It is compulsory that you spread and make known the content of this manual to the
persons concerned.
STAFF ROLE AND COMPETENCE
To assure the safety conditions of the general operations of the furnaces, it is necessary to define
all the professional roles here below:
QUALIFIED TECHNICIAN
Technician professionally qualified in furnace connections (electrical, water, etc.) enabled to issue
the necessary certifications.
ASSEMBLER/SERVICEMAN
Qualified technician of the furnace manufacturer responsible for furnace assembling and starting-
up as well as any extraordinary maintenance operations
OPERATOR
Fully involved in running the furnace. The operator loads the furnace, and assists in processing.
The operator must be informed of any danger from processing and read well the chapters of this
manual referring to the operations to be carried out
ORDINARY SERVICEMAN
Qualified technician well trained for carrying out ordinary maintenance operations of the furnace

Table of Contents