MADE IN ITALY
62
electric modular oven
When you press the STEAM GENERATOR key
, the Steam Generator turns on or off. When the steam generator is on, the LED of the key is
The steam injection function is enabled only if the LED of the Steam Generator is on.
Once the steam output is enabled, it remains on for a certain time that can be set from the
keyboard.
The steam injection is controlled manually via the STEAM INJECTION key
Setting the steam injection time
The steam injection time can be set directly from the key:
To set the time, hold the steam injection key for at least 3s.
On the 2 digits at the right of the TIME display appears the injection time. Use the UP and
DOWN arrows to change the value (0+60s).
To exit, press the key again or wait for the exit time (10s).
The injection can be interrupted before the set time by pressing the STEAM INJECTION key
again.
The steam extractor can be enabled using the relevant key or automatically before the end of
the baking cycle.
Enabling steam extractor by pressing the relevant key
; the extractor and the LED of the key turn on. To stop it, press the key again (the LED turns
Automatic extractor activation before the end of the baking cycle
The steam extractor can turn on automatically for a few minutes before the end of the baking
cycle. To set for how long before the end of the baking cycle should the extractor be on:
press the extractor key until the TIME display shows the activation time expressed in h:mm.
Use the UP and DOWN arrows to change the value (0+1h30m).
Exit: press the key again or wait for the exit time (10s).
If you set the time to zero, the function can be activated only manually.
To Next Page
Loading...