MAEVING RM1 - Charging the Battery; Checking the Brakes

Maeving | RM1 Owner’s Handbook
14
QUICK START GUIDE
Charging the battery
To charge the battery, place the battery on the charging base (1),
making sure the terminals are connected to the battery securely, and
turn the power supply on.
The battery has an LED charge indicator (2). The charge indicator
displays the battery’s current State of Charge (SoC).
For further information, see Charging the battery on page 32.
Checking the brakes
Make sure the brakes are functioning correctly. To do this, squeeze
each brake lever independently to apply the front and rear brakes.
The levers should be firm and you will be unable to roll the
motorcycle forward or backwards with the brakes applied.
For further information, see Braking on page 41.
1
2