MAEVING RM1 - Brake Pad and Brake Disc Wear Inspection

Maeving | RM1 Owner’s Handbook
46
MAINTENANCE AND ADJUSTMENT
Brake pad and brake disc wear
inspection
Inspect the brake pads and discs in
accordance with the maintenance schedule.
If the brake pads are worn to or below the
minimum service thickness of 1.5mm of
friction material, the brake pads should be
replaced.
If the brake discs are worn to or below the
minimum service thickness of 3.5mm, the
brake discs should be replaced.
If the brake pads and/or brake discs need
to be replaced, please contact the Maeving
Workshop Team or a Maeving Workshop
Partner. For further information, see
Contacts on page 6.