45
MAINTENANCE AND ADJUSTMENT
Braking system
Operate the front and rear brakes, paying particular attention to the
amount of travel in each brake lever before the brake being operated
becomes fully applied. The brake levers must have sucient reserve
travel to allow each brake to be fully applied without the brake lever
coming into contact with the handlebar.
Make sure both brake fluid reservoirs contain sucient brake fluid
above the lower limit line. For further information, see Brake fluid
level inspection and adjustment on page 48.
Make sure all hydraulic brake hoses and pipes are in good condition:
free of cracks, chafing, corrosion or damage.
Make sure the brake discs and pads are in a serviceable condition.
For further information, see Brake pad and brake disc wear
inspection on page 46.
To Next Page
Loading...