MAEVING RM1 - Installing the Primary Battery

To Next Page

To Previous Page

Maeving | RM1 Owner’s Handbook

BATTERY

Installing the primary battery

1. Open the primary battery storage compartment. For further

information, see Accessing the primary battery on page 28.

Note: Make sure the ignition key is in the OFF position before

installing the primary or secondary battery.

2. Carefully lift the primary battery and align it with the primary

battery storage compartment before inserting.

Note: The LED indicator on the primary battery must be facing

the front wheel, as shown.

3. Carefully lower the battery and fully push into position (1),

making sure that the battery fully engages with the connector.

4. Close the primary battery storage compartment (2).

! ! !