MagCore Plus II - Directions to Run the Test; Directions to Stop the Test

52
www.rbcbioscience.com
Directions to Run the Test
Directions to Stop the Test
Select
Replace O-RingSterilization
PistonEject Tip
Back
07/13/2020 09:25:32
Motor Test
Clean Needles
Motor Test
Back
M Axis Up
X Axis V Axis Y Axis M Axis
M Axis Dn
Motor Test
07/13/2020 09:25:32
ExecuteCancel
07/13/2020 09:25:32
Motor Test
Motor Test
Pause
Current Status
07/13/2020 09:25:32
X Asix Motor Test Moving...
V Asix Home Moving...
X Axis Motor
Encoder
Pluse
Speed
25128
25130
12000
-260
-796
1000
-1
0
500
Encoder
Pluse
Speed
Encoder
Pluse
Speed
Y Axis MotorV Axis Motor
X Axis Motor Test Moving...
ContinueAbort
Pause
Maintenance-Processing Pause
07/13/2020 09:25:32
Select Maintenance from
the Home Screen menu
To run the test press
Execute
Select Motor Test
To Pause/Stop the test
press Pause
When Machine shows the
Test Complete message
press OK
Select X-Axis
After to pausing the test:
-Press Continue to resume
the test
-Press Abort to terminate
the test
After the test is finished
machine will return to
the Maintenance menu,
press Back to return to the
Home Screen
X Axis Motor Test Abort
Abort
Maintenance-Processing Abort
07/13/2020 09:25:32
Completed
Maintenance-Processing Completed
OK
X Axis Motor Test Completed
07/13/2020 09:25:32
Select
Replace O-RingSterilization
PistonEject Tip
Back
07/13/2020 09:25:32
Motor Test
Clean Needles