Name: Magicard Rio Pro
Brand: Magicard
Rating: 5 (1 reviews)

Other manuals for Magicard Rio Pro

Maintenance Manual108 pages

Getting Started Guide30 pages

Questions and Answers:

E
Erik NunezJul 26, 2025
How do I fix a flipper card jam on my Magicard Rio Pro Printer?
- J
  John HarrisJul 26, 2025
  To address a flipper card jam on your Magicard Printer: 1. Open the lid and remove the card from the flip mechanism. 2. Ensure the flip mechanism rotates freely. 3. Do not pre-stage a card in the printer before printing. 4. Ensure the card is being fed into the slot at the front when the printer display asks you to. 5. Ensure the card is inserted far enough into the slot for the printer's rollers to grab it.
A
Amy RobinsonJul 31, 2025
What to do if my Magicard Rio Pro Printer is out of dye film?
- T
  Tamara WilsonJul 31, 2025
  If your Magicard Printer indicates it's out of dye film, try these steps: 1. Ensure you're using genuine film from the original printer supplier, as cheaper alternatives can cause issues. 2. Verify that dye film is installed; if not, install a new roll. 3. Check if the dye film is completely used up and install a new roll if necessary. 4. Confirm that the dye film gear meshes properly with the film teeth. 5. Ensure the correct power supply is connected to the printer. 6. If the problem persists, try installing a new roll of ribbon.
J
james15Aug 4, 2025
Why does my Magicard Printer say 'Unsupported film'?
- J
  John HardyAug 4, 2025
  If your Magicard Printer displays 'Unsupported film', it means the printer has validated the dye-film, but the color configuration is not supported. To resolve this: 1. Ensure you are using genuine film from the original printer supplier, as cheaper alternatives can cause this issue. 2. Consider that it might be a new film type, requiring a firmware upgrade. Download and install the latest firmware. 3. Confirm with your supplier that the film type is correct for your specific printer model.
J
Jack CrawfordAug 8, 2025
How to clear a card jam in Magicard Rio Pro Printer?
- N
  Nicole NelsonAug 8, 2025
  If your Magicard Printer has a card jam, follow these steps: 1. Open the lid and remove the card if possible. You can use the arrow buttons on the front panel to try and move the card. If you can't remove the card, close the lid and see if the card will eject. 2. Once the card is removed, ensure your cards meet the printer's recommended specifications. 3. Clean the printer rollers.
M
Matthew CampbellAug 12, 2025
What to do if Magicard Rio Pro shows 'No film detected'?

Magicard Rio Pro Specifications

General

Resolution	300 dpi
Card Capacity (Input)	100 cards
Card Capacity (Output)	70 cards
Print Technology	Dye Sublimation
Card Thickness	0.51mm to 1.02mm
Card Dimensions	ISO CR80 - 85.6mm x 54mm
Connectivity	USB, Ethernet
Encoding Options	Magnetic stripe
Power Supply	100-240V, 50-60Hz
Operating System Compatibility	Windows 7, 8, 10