Magicfx ECO2JET - Page 13

MAGICFX
®
ECO2JET
®
- User and Installation Manual 13
Idle Display
Main Menu
DMX Enable Address (1 - 512)
Display Dimmer (ON/OFF)
Unique ID
Bootloader CRC
Serial Number
Build Date
DMX/RDM SETTINGS
ERROR HISTORY
CONFIGURATION
INFORMATION
Type (Alarm/Error/Warning)
Enable Time (DDDD:HH:MM:SS)
Uptime (DDDD:HH:MM:SS)
Effect Time (DDDD:HH:MM:SS)
TEST MODE
DMX Enable
RDM (ON/OFF)
DMX Start Address (1 - 512)
Heat-up Power Mode
(ECO/FULL)
Display Flip (OFF/ON/AUTO)
Factory Defaults (YES/NO)
Heater (ON/OFF)
DMX Personality
(STANDARD/EXTENDED)
DMX Footprint (1/2)
Lock/Unlock Controller
(press and hold for 5 seconds)
Reset Errors
Pause Timer (1-60 s)
Run Timer (1-8 s)
Hold to prime
Test Mode (ON/OFF)
Menu structure