MAGICFX
®
ECO2JET
®
- User and Installation Manual 33
3.9. CLEAN UP
6
CAUTION
The fluid in the machine heats up and is pressurised
during operation, and unused hot fluid is returned into
the fluid can. Be aware the quick connector can be
hot while disconnecting the Fluid Can Lid Assembly of
the Attachable Fluid Can.
6
CAUTION
The heater and nearby surfaces of the machine get hot
during operation. Do not touch these parts during or
directly aer operation. Wait until the machine has
cooled down.
1. Make sure that the ECO2JET
®
is not in operation (FX LED indicator is o) and is
cooled down.
2. Disconnect the cables.
3. Disconnect the fluid hose using the quick connector and remove the fluid can.
4. Dismount the machine.
To Next Page
Loading...