18 MAGICFX
®
ECO2JET
®
- User and Installation Manual
2.3. RIGGING
Please follow the European and national guidelines for safe rigging and trussing.
2.4. NOISE LEVELS
The environmental noise level as measured at the ear is 95 dB(A). This level of noise is
only reached during the short instances that the output is active. Always wear
hearing protection when you are within 5 meters of the machine during operation.
2.5. SAFETY SYMBOLS
Symbol Meaning Position
Read the manual carefully before
use!
On the control panel.
Safety symbols
2.6. SAFETY WARNINGS
6
WARNING
Using a damaged or an improper installed machine
can lead to death, serious injury or property damage.
Always inspect the machine thoroughly before
operation.
6
WARNING
Do not install the machine if you are unsure of the
safety of a possible installation.
6
WARNING
When a safety wire is required, use a safety wire with an
emergency link that is tightened with a wrench.
Handtight is not enough.
6
WARNING
Make sure the structure intended to hold the machine
is calculated for the weight. The ECO2JET
®
is a heavy
machine. Overhead rigging requires extensive
experience in calculating load limits, installation
materials, and performing periodic safety inspection.
Only qualified personnel is allowed to perform this.
6
WARNING
Only hoist the machine using the safety steel backdish.
Do not hoist using the handles or tension straps.
6
WARNING
The safety steel and the emergency link need to have
a minimal workload of 40 kg.
6
WARNING
Missing or obscured safety symbols on the machine
can lead to death or serious injury. Make sure all safety
symbols are correctly in place, see section 2.5.
To Next Page
Loading...