Magicfx ECO2JET - Safety; General Safety Rules; Indoor & Outdoor Use

MAGICFX
®
ECO2JET
®
- User and Installation Manual 17
2. SAFETY
The ECO2JET
®
has been designed and constructed in such a manner that it can be
used safely. This applies to the use, the circumstances and the regulations as
described in this documentation. Reading this documentation and following the
instructions are therefore necessary for everyone who is authorised to work with the
ECO2JET
®
.
The ECO2JET
®
must be used in surroundings that:
• Have a reasonably stable temperature of between -10 and 50 °C.
• Have a relative humidity degree between 20 % and 90 % (non condensing).
• Are free of dust, corrosive gases and high concentrations of organic vapours.
• Are free of chlorine fumes.
• Are not situated in the vicinity of a source of vibration.
NOTICE
Do not place the ECO2JET
®
on top of subwoofers. This
may cause internal damage to the machine.
2.1. GENERAL SAFETY RULES
• Only authorised persons may work with the ECO2JET
®
.
• Do not use the ECO2JET
®
if there are people or animals in the direct output.
• Make sure that children, unauthorised people and animals do not obtain
access to the ECO2JET
®
.
• Make sure there are no freestanding objects or objects that can be damaged
by the ECO2JET
®
within the output distance.
• Do not connect more units to a single electrical circuit than the installed fuse
is able to handle. (Calculate the summed load with the electrical data from
Chapter 1).
• Do not remove or bypass any safeguards and safety symbols.
• All required safety devices must be in good condition and function properly.
• Ensure sucient lighting of the surroundings.
• Keep the workplace clean.
2.2. INDOOR & OUTDOOR USE
The ECO2JET
®
is designed for outdoor use and use in well-ventilated indoor spaces.
6
DANGER
Do not use the ECO2JET
®
in poor ventilated confined
spaces. Exposure to high levels of vapors or smoke can
cause skin irritation and may obscure visibility.
NOTICE
Provide the machine with extra protection in heavy
rain.