Note:
• Repeatsetting (except "ALL") will be cleared when moving to
another tide, chapter or track.
• During programmed playback for audio CD, repeat setting
will be effective for the tracks in the program.
• Repeat playback or repeat A-B playback may not available
with some discs.
• RepeatA-B playback does not function during other repeat
mode.
• To cancel point A, press [CLEAR] at step 2 in "Repeat A-B
Playback'_
• Stopping playback will cancel repeat A-B playback.
[] Random Playback
Thisfunctionshufflesthe playingorderof tracksinsteadof playbackinthe
sequence.
In stop mode, press [MODE] repeatedly until
"RANDOM" menu appears.
MODE
2 Press [PLAY I_] to start random playback.
Note: I
• To repeat the current track in the random mode, follow the
steps I and 2 in "Repeat Playback" on page 26 and select
"DTRACK" I
• To repeat the entire random selections, follow the steps I and
2 in "Repeat Playback" on page 26 and select "_ ALL"
• Random playback will be kept until you press [STOP II].
[] Programmed Playback
You may determine the order in which tracks will be played back.
In stop mode, press [MODE] repeatedly until the
"PROGRAM" menu appears.
MODE
Use [Cursor • / V] to select a desired track, then press
[ENTER] to store.
• Additional tracks may be on other screens. Use
[Cursor •1 V] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks
you wish to play back in the program.
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use
[PREV I_1_1 / NEXT IHH] to see all the tracks.
3 Press[PLAY I_] to start programmed playback.
Note:
• Press [CLEAR] to erase the last track in theprogram if you
make an error.
• To erase all programmed tracks at once, select "ALL CLEAR"
and press [ENTER] at step 2.
• While a program is being played back, [STOP II] works as
follows:
- Pressing [STOP II] once: The track will be in the resume
standby mode. Next time you press [PLAY I_ ], the playback
will resume from the point where it is stopped in the
programmed playback.
- Pressing [STOP II] twice: Resume mode will be canceled.
Next time you press [PLAY I_ ], playback will restart from the
first track in the original order. However, your programmed
playback can be restarted when you follow the above steps.
(Your programs are still stored until either the disc is ejected
or the unit is turned off.)
- On some discs, [STOP II] will not work while the resume
message appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1
and 2 in "Repeat Playback" on page 26 and select
" TRACK':
• To repeat the entire program, follow the steps I and 2 in
"Repeat Playback" on page 26 and select" ALL'f
• Turning off the unit or opening the disc tray will erase the
program.
• You cannot use [the Number buttons] to select another
track during programmed playback. Use [REW _1_1]or
[FWD I_4_] to select other tracks in the program.
• You cannot combine random playback with programmed
playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in
"PROGRAM" menu.
i:!ilil
iii,i_ii
iZ_ii
i i!!!!
EN
To Next Page
Loading...
Need help?
General
