Magner 155 - Page 24

User Settings
No.
No.No.
No. Service Menu
Service MenuService Menu
Service Menu Sub Menu
Sub MenuSub Menu
Sub Menu
9 Interface Print To set Baud rate, Data Bit, Stop Bit,
Parity. Column, Cutting Code about
Print
Network To set IP, Subnet mask, Gate Way,
DNS, Port, Fixed IP
External Display To set 7 Segment, LCD Single, LCD
Double
10 PW Setting the ID/Password
11 Upgrade Mecha F/W To Upgrade Mecha firmware using USB
Recog F/W To Upgrade Recog firmware using USB
UI S/W To Upgrade UI software using USB
Template To Upgrade Template using USB
Tape F/W To Upgrade Tape firmware using USB
(FS,FSD-only)
Sonar F/W To Upgrade Sonar firmware using USB
(VS,VSD-only)
12 Diagnostic Pick-up Motor To drive the Pick-up motor during 10
sec.
Feed Motor To drive the Feed motor during 10 sec.
Fan Motor To drive the Fan motor during 10 sec.
Swing Selector Turn it on and off repeatedly 5 times.
Circulation To drive every motor.
Count Emit notes with Stack or Reject
Service
-
--
-23
2323
23-
--
-