WRITE_LOCKING: Software write-protection can be
enabled or disabled.
FACTORY_RESET: Command for resetting the device for
default values. The setting of the bus address in not affected.
• RESTART_WITH_DEFAULTS: As RESTART
DEFAULT will set all configuration parameters to
their default values. Devices need to be reconfigured
following activation of this function. The bus address
is not affected.
• WARM_START: No parameters changed
• RESET_ADDRESS_TO_DEFAULT: Other
parameter unchanged
DESCRIPTOR: User-definable text string to describe the
device within the application.
DEVICE_MESSAGE: User-definable message string used
to describe the device within the application of in the plant.
DEVICE_INSTAL_DATE: Installation date of the device.
IDENT_NUMBER_SELECTOR: Selects manufacturer-
specific Ident number issued by PNO or profile-specific
Ident number to determine features and behavior for
interacting with device.
HW_WRITE_PROTECTION: Indicates the position of a
write block mechanism (e.g., hardware jumper).
22
57-645 Eclipse Guided Wave Radar Transmitter - PROFIBUS PA
™
To Next Page
Loading...
