Magnetrol F10 - 4.6.2 Model F50

26
47-602 F10 and F50 Flow Switches
 




➀ Process temperatures based on -40 °to +160 °F
(-40 °to +71 °C).
➁ Bronze models are rated to a maximum process
temperature of +500 °F (+260 °C).
Stainless steel models are limited to the maximum
temperature of the selected switch mechanism.
➂ On steam applications, temperature down-rated
to +400 °F (+204 °C) process at +100 °F (+40 °C)
ambient.
➃ On models with bronze bodies
3
⁄4" or 1" NPT pipe
sizes, consult factory for HS switches.
   
F50-1 Bronze
300 Series 400 Series 400 psi @ +100 °F (27.6 bar @ 38 °C)
Stainless Steel Stainless Steel 200 psi @ +500 °F maximum (13.8 bar @ 260 °C maximum)
F50-4 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel
1150 psi @ +100 °F (79.2 bar @ 38 °C)
600 psi @ +750 °F maximum (41.3 bar @ 399 °C maximum)
A2
3
⁄4" pipe size with
3
⁄4" NPT connections
B2 1" pipe size with 1" NPT connections
C2 1
1
⁄2" pipe size with 1
1
⁄2" NPT connections
D2 2" pipe size with 2" NPT connections

     
3
⁄4" NPT
n/a 1.1 increasing 1.6 increasing 2.3 increasing 3.4 increasing 4.9 increasing
n/a 0.8 decreasing 1.2 decreasing 1.8 decreasing 2.6 decreasing 3.7 decreasing
1" NPT
1.0 increasing 1.7 increasing 2.5 increasing 3.7 increasing 5.5 increasing 7.1 increasing
0.8 decreasing 1.4 decreasing 2.1 decreasing 3.0 decreasing 4.5 decreasing 5.8 decreasing
1
1
⁄2" NPT
1.3 increasing 2.7 increasing 4.7 increasing 7.6 increasing 12.3 increasing 21.1 increasing
1.1 decreasing 2.3 decreasing 4.0 decreasing 6.5 decreasing 10.3 decreasing 17.9 decreasing
2" NPT
1.9 increasing 3.1 increasing 5.1 increasing 8.4 increasing 14.3 increasing 24.8 increasing
1.6 decreasing 2.7 decreasing 4.3 decreasing 7.1 decreasing 12.1 decreasing 21.0 decreasing

  
    
       
3
⁄4" or 1" A thru F
JDG
100 psig 0.63" Bronze
1
1
⁄2" or 2"
A thru D
(7 bar) (1.6 mm) E and F
JDE
Series J bleed type
+550 Stainless Steel
3
⁄4" thru 2" A thru F
(+288)
3
⁄4" or 1" A thru F
JEG
60 psig 0.94" Bronze
1
1
⁄2" or 2"
A thru D
(4 bar) (2.4 mm) E and F
JEE
Stainless Steel
3
⁄4" thru 2" A thru F
100 psig
n/a
Bronze 1
1
⁄2" or 2" E and F
KOE
Series K non-bleed type
+550 (7 bar) Stainless Steel
3
⁄4" thru 2" A thru F
(+288) 40 psig
n/a Bronze
3
⁄4" thru 1" A thru F
KOG
(3 bar) 1
1
⁄2" or 2" A thru D
➀➁