Operation Manual easyScreen
Temperature
Relative Humidity
Ambient Pressure
Boot-up time
Warm-up Time
+5 °C to +40 °C / + 41 °F to +104 °F
15 % to 93 % (non-condensating)
98 kPa to 104 kPa
< 5 s
Null
Transport &
Storage
environment
0 C to 50C, 32 °F to 122°F
-25 C to 70 C, -13 °F to 158 °F
Storage and transport
rel. humidity
10 % to 95 % (non-condensating)
2000 m / 6561 ft. above sea level
IP marking is an ingress protection marking. The marking specifies
the protection provided against ingress of particle matter and liquids.
This device has different IP marking with the follow impact:
IP02: To protect the device against rain and water always use the
carrying bag during transport.
IP20: This marking can be found on the device parts meaning that
the parts are not protected against water
NOTE: The charger, power supply and cradle are not to be used in
home healthcare environments.
160 mm x 85 mm x 21 mm /
6.4 in x 3.3 in x 0.8 in
95 mm x 56 mm / 3.7 in x 2.2 in
Bluetooth
Transmit frequency: 2400 MHz to 2483.5 MHz
Modulation types: GFSK, π/4-DQPSK and 8DPSK
Radiated power: 2.5 mW (Class 2)
English, German, Spanish, French, Italian,
Dutch, Turkish, Chinese, Japanese, Korean,
Romanian, Norwegian
Depending on use – typically > 3 years
1 GB (max. 250 patients can be stored with
50 tests each)
For OAE Probe, ABR preamplifier or
BERAphone
®