Major tech MT775 User Manual

+
-
10. DC VOLTAGE MEASUREMENT
1. Set the function switch to range
position. The meter automatically defaults to
DC Volts.
2. Insert the red test lead into the “V Ω TEMP HZ”
input terminal and the black lead to the “COM”
terminal.
3. Connect the other end of the test leads to the
circuit under test.
4. Read the display. If a “-” sign is displayed, the
red lead is the negative potential.
Note: • The meter is set to default to “Auto
Range” mode.
• Pressing the hold button will
allow the user to record the peak
maximum and minimum readings on the
AC volt range. See page 7 for further
instructions for “PEAK” Hold function.
Battery
9
PEAK
V
__
~
__ __ __
Hz

Major tech MT775 Specifications

General

Brand	Major tech
Model	MT775
Category	Measuring Instruments
Language	English