AC Supply
11. AC TRUE RMS VOLTAGE MEASUREMENT
1. Set the function switch to range
position.
2. Press the button to select the AC Volt
range. The meter automatically defaults to DC
Volts.
3. Insert the red test lead into the “V Ω TEMP HZ”
input terminal and the black lead to the “COM”
terminal.
4. Connect the other end of the test leads to the
circuit under test. Take the reading on the
display.
Note: • The meter is set to default to “Auto
Range” mode.
• Pressing the hold button will
allow the user to record the peak
maximum and minimum readings on the
AC volt range. See page 7 for further
instructions for “PEAK” Hold function.
MODE
10
PEAK
V
__
~
__
__ __
Hz
To Next Page
Loading...
Need help?
General
