MAJORITY Fitzwilliam 3 Instruction Guide

22
EN
Manual Tuning
To search for FM stations manually, turn the SCROLL/SELECT dial on unit or press
12 w
/
s 3
buttons
on remote control repeatedly until your desired frequency is reached.
With FM radio, it may be necessary to ne tune each station by turning the SCROLL/SELECT
dial on unit or pressing
12 w
/
s 3
buttons on remote control repeatedly. Each press will adjust
the frequency by 0.05 MHz. If reception is still poor, adjust the position of the aerial or try
moving the radio to another location.
FM Display Modes
Every time you press the INFO button on the unit or remote control , the display will show the
following display modes: Radio Text – Programme Type – Frequency – Date
RDS Radio Text
This is a scrolling message information about the current programme.
Programme Type
This describes the “Style” or “Genre” of music that is being broadcast.
Station Name / Frequency
When an RDS station is received, the name of that station will be displayed, or if not the frequency will
be displayed.
Date
This displays the current date provided automatically by the broadcaster.
Scan Setting
1. Press the MENU button to access FM menu.
2. Press
12 w
/
s 3
buttons to select Scan setting and then press the SELECT button to conrm.
3. Press
7
/
8
buttons to select [Ye s ] to receive strong signal only and then press the SELECT button
to conrm.
Audio Setting
1. Press the MENU button to access the main menu.
2. Press
12 w
/
s 3
buttons to select Audio setting and press the SELECT button to conrm.
3. Press
7
/
8
buttons to select [Ye s ] to listen in mono only or [NO] to let the unit select Stereo or
Mono automatically.
4. Press the SELECT button to conrm.
Alternatively, press the MONO/ST. button on the remote control to toggle between the Mono only or
Mono/Stereo selection.
Instructions Guide

MAJORITY Fitzwilliam 3 Specifications

General

Brand	MAJORITY
Model	Fitzwilliam 3
Category	Radio
Language	English