MAJORITY Fitzwilliam 3 - Setting the Alarm; Cancelling the Alarm

26
EN
Setting the Alarm
1. Press ALARM button on the remote control, the display shows “Alarm (1 or 2): O [hh:mm]”.
2. Press
12 w
/
s 3
buttons to select the Alarm number (1 or 2) and then press the SELECT button to
start the setting of the following parameters.
Press
12 w
/
s 3
buttons to select then press the SELECT button to conrm
Enable O/ Daily/ Once/ Weekends/ Weekdays
Time (Alarm On time)
Mode Buzzer/ Internet radio/ DAB/ FM
Preset Last Listened/ (Preset station)
Volume 0-32
Save Save and conrm the alarm setting
3. Finally, select "Save" and press the SELECT button to save the alarm setting. The display will show
Alarm Saved. When the alarm is set, the alarm icon will apear on the display.
4. To temporarily switch o alarm, press the SNOOZE button on remote control to activate Snooze
function when alarm sounds. Press the SNOOZE button on remote control repeatedly to set
snooze period time of 5, 10, 15 or 30 minutes in turn. The set snooze time will show on the display
and unit will go to standby.
5. To turn o the alarm when it sounds, press the
q
/VOLUME dial on unit or
q
button on remote
control, or ALARM button on remote control
Cancelling the Alarm
1. Press ALARM button on the remote control, the display shows “Alarm (1 or 2): On [hh:mm]”.
2. Press the
12 w
/
s 3
buttons to select the Alarm number (1 or 2) and then press SELECT button to
start the setting of the timer.
3. Press the
12 w
/
s 3
buttons to select “Enable” then press the SELECT button to conrm.
4. Press the
12 w
/
s 3
buttons to select “O” then press the SELECT button to conrm.
5. Finally, select "Save" and press the SELECT button to save the setting.
6. Alternatively, during Standby mode, press the ALARM button on remote control repeatedly can
turn the saved Alarm 1/2 on/o sequentially.
Instructions Guide