15
Instructions Guide
FM Radio
Press the ‘Mode’ button (Ref.) multiple times on the unit to switch to
DAB/DAB+ Radio. To select the mode from the remote press the ‘FM/
DAB’ button (Rem.19). The rst time you switch to FM mode, the FM
frequency “87.5 MHz” will be displayed on the screen.
Fully extend the antenna (Ref.) to ensure that the best signal is being
received before scanning for available stations.
To auto-scan for available stations with good signal, press the ‘INTRO/
AMS’ (Automatic Music Scan) button (Rem.4) on the remote control for
the radio to begin scanning up the frequency band. The next available
station with good signal will then begin to play.
To tune a specic frequency manually
To listen to a specic frequency, press and hold the ‘Next’ button
(Rem.25) on the remote to search forward quickly, or press and hold
the ‘Previous’ button (Rem.10) to search back quickly. It will stop
searching when the button is released.
To search slowly through the frequencies, press the ‘Next’ (Rem.25) or
‘Previous’ buttons (Rem.10) on the remote multiple times rather than
holding them.
EN
To Next Page
Loading...
Need help?
General
