16
Instructions Guide
When on FM mode, press the Menu button (Rem.8) on the remote to
open FM radio settings. Once pressed, the following options will be
available to scroll through with the Previous and Next buttons on the
remote (Ref./25) or using the Navigate/OK dial on the Unit (Ref.)
and can then be selected to open further setting options:
FM Scan Setting
Choose between scanning strong and weak signals (All Stations) or
only the stations with strong signal (Strong Stations Only), or the
Default Station settings (Normal Stations). Select your chosen option by
pressing the ‘Enter/Play’ button (Rem.26) to conrm your choice.
Audio Settings: Mono and Stereo
All stereo stations are reproduced in stereo; for weak stations this
can result in poor audio quality. The audio quality in FM mode can be
improved by using mono.
Once “Audio Setting” has been selected, press the ‘Previous’ (Rem.10)
or ‘Next’ (Rem.25) buttons or use the Navigate/OK dial (Ref.) to choose
between selecting “Stereo allowed” or “Forced mono”. Select your
chosen option by pressing the ‘Enter/Play’ button (Rem.26) to conrm
your choice.
FM Radio Settings
EN
To Next Page
Loading...
