MAJORITY OAKINGTON+ - Device Settings; Time, Date, and Alarm Settings

27
Manually Setting the Time and Date
The time will automatically update after the rst use of DAB radio.
However, you can still set the time manually as follows.
Press the ‘Clock’ button (Rem.13) on the remote.
When setting the time and date, select ‘Set Time/Date’. The date will
display in the format [DD-MM-YYYY], with the day ashing. The time will
display underneath in the format [HH:MM]. Input the Date, Month, Year,
Hour and Minutes using the ‘Up’ (Rem.9) and ‘Down’ (Rem.11) buttons
on the remote.
Press the ‘Clock’ button and navigate through the options using the
‘Up’ (Rem.9) and ‘Down’ (Rem.11) buttons on the remote to change
between 12 hour or 24 hour clock and date display format between
[DD-MM-YYYY] and [MM-DD-YYYY]. Your selection will then be saved.
Settings: Time and Date
Sengs
Settings
EN