MAJORITY OAKINGTON+ - Page 28

26
USB Functions and Navigation
Playing Repeatedly
For a USB device, press the ‘Repeat’ button (Rem.5) on the remote
multiple times to view options: Repeat All (ALL), Current Track (SINGLE)
or Repeat O (OFF).
Random Play
For a USB device, random play can be set by pressing the ‘Random’
button (Rem.22) on the remote control.
Navigation
To navigate through folders on your USB drive, press the P +/- buttons
(Rem.14) Use P + to skip to the next folder, and use P - to skip to the
previous folder.
To navigate through tracks, use the ‘Previous’ and ‘Next’ buttons
(Rem.10/25).
Make navigating your USB les easier by pressing the ‘AMS’ button on
the remote (Rem.4). Wait for the unit to scan the audio les on your
device. After the unit has scanned your USB drive, it will assign a code to
each of your les, starting at 001. Press the code corresponding to your
chosen le to begin playing it.
Alternatively, use the numbers on the keypad (Rem.15) to select an
audio le corresponding to the current folder. If the number does not
correspond to a le, the unit will search the next folder.
Instructions Guide
EN