MAJORITY OAKINGTON+ - Advanced System Settings

31
Settings
Settings: Additional Functions
System Reset
Press the ‘Menu’ button (Rem.8) on the remote control.
Use the ‘Up’ (Rem.9) and ‘Down’ (Rem.11) buttons to scroll to “System
Settings” and press the ‘Play/Pause’ button (Rem.26) on the remote
control to select. Press the ‘Up’ (Rem.9) and ‘Down’ (Rem.11) buttons
to scroll to “Factory Reset”. Use the ‘Next’ and ‘Previous’ (Rem.25/10)
buttons to scroll between “Yes” or “No” and Press the ‘Play/Pause’ button
(Ref.) to conrm selection.
SW Version – Software Version Display
Press the ‘Menu’ button (Rem.8) on the remote control. Use the ‘Up’
(Rem.9) and ‘Down’ (Rem.11) buttons or the Navigate/OK dial (Ref.)
to scroll to “System” and press the ‘Play/Pause’ button (Rem.26) on the
remote control to conrm.
Then use the ‘Up’ (Rem.9) and ‘Down’ (Rem.11) buttons to scroll to
“Software Version” and press the ‘Play/Pause’ button (Rem.26) on the
remote to conrm. The software version will be displayed.
Headphone Connection
Connect your headphones to the socket at the rear of the unit (Ref.).
The unit can support Mobile Phone headphones. Please note that the
unit can not support Bluetooth/wireless earphones.
EN