24
AUX-In
Instructions Guide
AUX Audio-In
You can connect your phone or tablet with an AUX 3.5mm cable that
connects to the ‘AUDIO-IN’ jack on the back of the unit (Ref.).
Insert the audio cable. To choose AUX mode, press the ‘Mode’ button
(Ref.) repeatedly on the unit until ‘Auxiliary Input’ displays on the front
screen (Ref.). Alternatively, select the ‘AUDIO’ button on the remote
(Rem.20).
Now you can begin playing media from your device. Ensure that the
volume on the device is switched up for the best sound quality.
Note: when using playback, the ‘Next’ and ‘Previous’ buttons on the unit
or remote can not be used to navigate through tracks on your phone/
AUX-connected device. This only works in Bluetooth mode.
EN
To Next Page
Loading...
