21
Instructions Guide
CD Playback and Basic Functions
Please note all (Ref.) refer to Pages 1-3 Controls and Functions and
(Rem.) refers to Pages 4-5 on the remote control functions.
Notes for usage:
* Please do not force the CD into the CD drive.
* Once a CD has been inserted, eject by pressing ‘Eject’ button on the
unit (Ref.) or remote (Rem.17).
* When CD is protruding from the device after ejection, please do not
attempt to force the CD back into the device, and do not attempt to re-
insert the CD while it is protruding. This will damage the CD mechanism.
* To reinsert, rst remove the CD from the CD drive and then re-insert it.
Alternatively, wait 30 seconds and the CD will re-insert itself.
After pressing Eject (Rem.17/Ref.), wait 5 seconds. CD will eject.
Play a CD
Ensure unit is in CD mode by pressing ‘CD' (Rem.2) on remote or press
‘mode button on unit until CD mode is selected. Insert CD into CD drive.
Wait 10 seconds. CD will begin to play.
Press Rem.26/ Ref. to Play/Pause.
Press Rem.25/9 Or Ref./8 to Fast Forward/Rewind. Once the track time
is at the required position, press Play (Rem.26/Ref.) to Play.
Press Rem.12 to Stop.
Press Rem.17/Ref. to Eject. Wait 5 seconds. CD will eject.
Press Rem.25/Ref. to Skip to next CD track.
Press Rem.10/Ref. to Skip to previous CD track.
EN
To Next Page
Loading...
Need help?
General
