2-54
USING THE LIFTING PLATFORM
15
BEFORE STARTING THE LIFTING PLATFORM
- Check the following levels:
• Engine oil.
• Oil in the hydraulic reservoir.
• Coolant.
STARTING THE LIFTING PLATFORM
- Turn the ignition key 1 to notch 2 to make the electrical contact (Fig. B).
- Press button 2 to start up the IC engine (Fig. B).
Do not operate the starter for more than 30 seconds and run a pre-heating cycle between all failed attempts to
start.
- Release the button as soon as the engine star
ts and let the engine run at tickover speed.
Never try to push or pull the lifting platform to start it. Such an action would cause severe damage to the
transmission.
TRANSPORT POSITION
FORWARD
TRANSLATION
REVERSE
TRANSLATION
A
B
C
Notch 2
1
2
647414 EN (27/05/2015)
To Next Page
Loading...
