Manitou MLT 845 120 LSU 3-E3 Series User Manual

3-253-25

D6/1D6/1
11
D6/2D6/2
22
D5/1D5/1
11
D5/2D5/2
22
D5 - FUEL FILTERD5 - FUEL FILTER
CHANGECHANGE
- Open engine hood and lift the battery cover.- Open engine hood and lift the battery cover.
-- Carefully clean the outside of Carefully clean the outside of the filter and its holderthe filter and its holder, to prevent dust from getting into, to prevent dust from getting into
the system.the system.
-- Place a container under the fuPlace a container under the fuel filter 1 (fig. D5/1) and el filter 1 (fig. D5/1) and undo the filterundo the filter..
-- Fill up the new fuel filter (see: 3 - MAINTENANCE: FILFill up the new fuel filter (see: 3 - MAINTENANCE: FILTERS AND BELTERS AND BELTS) with clean diesel.TS) with clean diesel.
-- Refit the filtRefit the filter onto its holderer onto its holder..
Tighten the fuel filter by hand pressure only and lock the filter in place by a quarter turn.Tighten the fuel filter by hand pressure only and lock the filter in place by a quarter turn.
-- Pressurise the circuit by means of Pressurise the circuit by means of the hand pump 2 (fig. D5/the hand pump 2 (fig. D5/2).2).
- Remove the container from under the - Remove the container from under the filter.filter.
- Start up the I.C. engine and make sure there is no leakage.- Start up the I.C. engine and make sure there is no leakage.
D6 - GEAR BOX OIL FILTERD6 - GEAR BOX OIL FILTER
CHANGECHANGE
- Remove the cover plate 1 - Remove the cover plate 1 (fig. D6/1).(fig. D6/1).
- Unscrew and discard gear box oil filter 2 (fig. D6/2).- Unscrew and discard gear box oil filter 2 (fig. D6/2).
- Carefully clean the filter head with a clean, lint-free cloth.- Carefully clean the filter head with a clean, lint-free cloth.
- Slightly lubricate the new - Slightly lubricate the new seal and fit the seal on seal and fit the seal on the filter.the filter.
-- Fill up the new gear box oil filter (see: 3 - Fill up the new gear box oil filter (see: 3 - MAINTENANCE: FILMAINTENANCE: FILTERS CARTRIDGES ANDTERS CARTRIDGES AND
BELBELTS) with oil TS) with oil (see: 3 - MAINTENANCE: (see: 3 - MAINTENANCE: LUBRICANTS AND FUEL).LUBRICANTS AND FUEL).
- Refit the filter, making sure that the seal - Refit the filter, making sure that the seal is correctly positioned and is correctly positioned and tightened.tightened.
Tighten the gear box oil filter by hand pressure only and lock the filter in place by a quarter turn.Tighten the gear box oil filter by hand pressure only and lock the filter in place by a quarter turn.
- Put back the cover plate - Put back the cover plate 1 (fig. D6/1).1 (fig. D6/1).
https://www.forkliftpdfmanuals.com/

Manitou MLT 845 120 LSU 3-E3 Series Specifications

General

Brand	Manitou
Model	MLT 845 120 LSU 3-E3 Series
Category	Forklifts
Language	English