11
R8 PRO SERVICE GUIDE
6
7
Once the air spring assembly is removed clean the inside
of the stanchion with isopropyl alcohol and a lint free
towel (Be careful to not scratch the inner surface of the
stanchion). Inspect the inside and outside of the stanchion
for scratches or other damage.
8
Liberally apply Slickoleum™ grease to the piston seal, outer
piston surface, and spring shaft. Add 3cc’s of Slickoleum™
grease to the top of the air piston.
AIR SPRING SERVICE
Add Slickoleum™ grease to the stanchion threads before
inserting the air spring assembly. Spread grease across
entire thread surface.
To Next Page
Loading...
