SAFETY INFORMATION RT530E-2 OPERATOR’S MANUAL
2-46 Published 5-3-2016, Control # 555-02
Overload less than 25%
1
Stabilizer
Cylinders
Inspect for leaking.
2
Outrigger
Pads
Inspect for deformation and cracked welds.
Overload from 25% to 49%
1
Stabilizer
Cylinders
Inspect for leaking.
2
Outrigger
Pads
Inspect for deformation and cracked welds.
3
Outrigger
Beams
Inspect for deformation and cracked welds.
4
Outrigger
Boxes
Inspect for deformation and cracked welds.
5 Welds Inspect for cracks.
6 Paint
Inspect for cracked paint which could indicate twisted,
stretched, or compressed members.
Reference Only
To Next Page
Loading...
