Manitowoc Indigo Series User Manual

Part Number Preliminary 6/11 103
Control Board
10. Follow these on-screen instructions to:
A. Insert Drive (Insert the flash drive into the
USB port on the ice machine’s control board.)
B. Press Check (Press the Checkmark.)
C. Wait For Comp (Wait approximately 5 to 10
minutes for the Firmware upgrade to
complete.
11. Upgrade Complete will appear on the display,
along with the firmware version number.
RT Harvest
Compressor
LT Harvest
Pump
Display Light
Micro Light
Clean Light
Harvest Light
SL-1 Light
SL-2 Light
Fuse
Thermistors
T1
T2
T3
T4
Display
RS485
Bin LED
Water
Level
Probe
LuminIce
Transformer
Battery
Bin Switches
Bin
Thermostat
USB
Ice Thickness Probe Light
Water Level Probe Light
Right Bin Switch Light
Left Bin Switch Light
Dump Valve
Relay Lights
USB Connector

Manitowoc Indigo Series Specifications

General

Model	Indigo Series
Ice Type	Nugget
Cooling System	Air-cooled, Water-cooled
Power Supply	Varies by model
Material	Stainless steel exterior
Water Connection	1/2" NPT water inlet