Manitowoc Indigo Series User Manual

Part Number Preliminary 6/11 231
UPGRADING FIRMWARE WITH A FLASH DRIVE
OR TRANSFERRING SETUP DATA TO MULTIPLE
MACHINES
1. Drag and drop the file from your email onto a flash
drive or refer to Exporting data to a flash drive to
transfer settings to multiple machines.
2. Ensure that the ice machine’s power is on.
3. Press the Menu button.
4. Press the Down arrow until Service is highlighted.
5. Press the Checkmark. The Service menu will be
displayed.
6. Press the Down arrow until USB Setup is
highlighted.
7. Press the Checkmark. USB Stick will appear
highlighted.
8. Press the Checkmark again. A submenu with
Download Frm (Download Firmware) appears.
9. Ensure that Download Frm is highlighted and
press the Checkmark. A display of instructions will
appear.
Important
Do not use a flash drive with a built-in software
program, such as Sandisk brand.
USB Setup USB Stick Download Frm

Manitowoc Indigo Series Specifications

General

Model	Indigo Series
Ice Type	Nugget
Cooling System	Air-cooled, Water-cooled
Power Supply	Varies by model
Material	Stainless steel exterior
Water Connection	1/2" NPT water inlet