Part Number 80-1230-9 10/10 139
Low ice capacity. Water float valve filter screen is dirty. Remove and clean the filter screen.
Incoming water supply is shut off. Open the water service valve.
Water float valve stuck open or leaking. Remove the water float valve and clean it.
The condenser is dirty. Clean the condenser.
High air temperature around ice machine
(air-cooled models).
Air temperature must not exceed 110°F
(43.3°C).
Inadequate clearance around the ice
machine.
Provide adequate clearance.
Water dump valve is leaking. Clean the dump valve.
Objects stacked around ice machine, blocking
airflow to condenser (air-cooled models).
Remove items blocking airflow.
Incoming water supply temperature is above
90°F.
Connect ice machine to a cold water supply.
Water Pressure is low. Water Pressure must remain between 20 and
80 psig.
Problem Possible Cause To Correct
To Next Page
Loading...
Need help?
General
